NEW ARRIVAL

R6 ‘Rescue’ Challenger Multipurpose Helmet

$385.00 – $415.00 exc GST

The ‘Rescue’ Challenger introduces an innovation from Pacific Helmets – the Rescue Eye Protector.

It has been designed to integrate with the helmets headband using a ratchet hinge that controls deployment of the Rescue Eye Protector. The sliding hinge design allows the user to control the distance the Rescue Eye Protector is deployed from the face, introducing compatibility with a large range of spectacles.

The revised shape of the Rescue Eye Protector has improved side particle protection that exceeds the most stringent standards, including AS/NZS 1337.

The Pacific R6 ‘Rescue’ Challenger is available in a range of colours and paint finishes, not available for purchase through our online store. Please contact Pac Fire about your colour selection. Additional fees and lead times may apply.

SKU: HR6C REP Categories: , , , , , , Tags: , , , , , ,
Pacific Helmets - A Lakeland Company

Product Features

  • DUPONT™ KEVLAR® REINFORCED FIBREGLASS COMPOSITE SHELL provides integral strength and excellent penetration protection. This lightweight shell is chemical and UV resistant with inherent heat and flame resistance.
  • POLYURETHANE CAP provides excellent shock impact absorption and a thermal barrier.
  • ULTRASTOP PADDING provides additional shock absorption.
  • PREMIUM REFLECTIVE TRIM 8 piece 3M680 silver supplied fitted to the helmet for increased visibility.
  • EASI-ON-OFF (EOB) BASE FOR TORCH. Attach Underwater Kinetics or Adaro torch with a helmet clip (sold separately). Mounted on right hand side.
  • CLEAR, CLIP-ON FACE SHIELD provides medium impact particle impact protection, with heat and flame resistance. Full face cover for excellent splash protection (Optional).
  • RESCUE EYE PROTECTOR medium impact eye protection (I) that can be deployed easily with a gloved hand. Adjusts to suit user preference and accommodate different face shapes.
  • EARMUFF BRACKETS Compatible with approved helmet attached earmuffs with a 25mm tongue.
  • ACCESSORY STRAPS, front and rear rubber straps for securing approved helmet accessories like single strap goggles and headlamps.
  • PACIFIC RATCHET ADJUSTABLE HEADBAND, sizing range from 52–65cm. Includes front and rear comfort padding.
  • 6-POINT RIBBON SUSPENSION WITH MESH INSERT. Fully modular for decontamination and replacement. Mesh insert spreads weight evenly over the head.
  • 4-POINT CHIN STRAP. Single handed adjustment at multiple locations for maximum comfort, fit and stability. Includes chin loop.
  • PACIFIC LOW PROFILE BUCKLE can be secured, released, and adjusted.
  • FLAME RESISTANT NECK PROTECTOR. 200mm long, black Nomex®, single layer.
  • COMMS CLIP. Mounted on left hand side of the headband for Titan Boom Mic HUC-5.
  • COLOUR. The Pacific R6 Challenger is available in a range of colours, white pictured.

Additional Information

Weight 1.05 kg
Dimensions 28 × 22 × 20 cm
Application

Industry Work, Mining, Paramedic, Rescue, Wildland Firefighting
Certification

AS/NZS 1801:1997 Type 3
Helmet Colour

Army Green (Satin), British Racing Green, Canary Yellow, Candy Apple Red, Corinthian Blue, Desert Storm (Textured), Fire Royal Blue, Gloss Black, Green, Padre Purple, Pantone Yellow, Pink, Rescue Blue, Satin Black *, Signal Green, Silver, Swedish Green, UK Green, UN Blue, Verdie Blue, Blue, Orange, Daisy Yellow, Fluro Lime, Fluro Orange, Red, White

Pacific Helmets are available in a range of colours and paint finishes, not available for purchase through our online store.

Please contact Pac Fire about your colour selection. Additional fees and lead times may apply. Note the colours displayed below should be used as a guide only – colours will display differently on a screen to the finished product.

Relevant Certifications

AS/NZS1801:1997 Type 3
Standards Australia / New Zealand – OCCUPATIONAL PROTECTIVE HELMETS: WORKING AT HEIGHTS & WILDLAND FIRE

Reflective trim and neck protector must be attached to your helmet for it to meet AS/NZS 1801:1997 Type 3 certification.

Downloads

R6C 'Rescue' Challenger Multi-Purpose Helmet – Product Data Sheet
Pacific Helmets Product Warranty
Pacific Helmets - User Manual

Spare Parts

Videos

Technical Bulletins

Change to front merino comfort padding by Pacific Helmets - January 2024

Change to front merino comfort padding by Pacific Helmets – January 2024

Posted: 24/01/2024

To improve compatibility with the new ‘Rescue’ Eye Protector (available as an option for the Pacific R6 Helmets in 2024), Pacific Helmets is changing the design of the merino front comfort pad that is a component of the following models of helmets: What does this mean for Pac Fire & our customers? Two additional slots […]

0 comments
Changes to the Underwater Kinetics Torch Holder Clip

Changes to the Underwater Kinetics Torch Holder Clip

Posted: 16/03/2020

In November 2019 the 3AA CPO Underwater Kinetics eLED Torch (UKT10034+) underwent design changes required to gain certification under the revised standard UL913 Edition 8. These changes resulted in an increase in torch body width of approximately 1mm. This change in size has resulted in the B2066114 Underwater Kinetics torch clip having a firmer fit. […]

0 comments

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products